When it comes to modern day pool maintenance, a robot pool cleaner is absolutely mandatory for hands free, maximum efficiency cleaning. But even the best of things can go wrong sometimes. Whether your robot cleaner won’t go up walls or simply stops working in your pool soon after it gets started, becoming familiar with the way a pool cleaning robot works can save you time and help preserve the life of your purchase. In this guide, we’ll be discussing the general robotic, suction, and pressure pool cleaners and addressing their most prevalent issues with actionable solutions.
Contents
- My Pool Cleaner Will Not Move or Stops Operating Halfway Through a Cycle
- Why Does My Pool Vacuum Robot Not Climb Walls?
- Robot For Pool Is Missing Debris or Algae
- My Suction or Pressure-Side Cleaner is Malfunctioning
- (Optional) A Robot Pool Cleaner That Does Not Clean the Entire Pool
- When to Drain or Acculity Pool.
- Conclusion: Keep Your Robotic Pool Cleaner Well-Maintained
My Pool Cleaner Will Not Move or Stops Operating Halfway Through a Cycle
How to troubleshoot a pool cleaner if it stops If at anytime your pool cleaner stops, first check that there is not a loss of power. Check for loose connection and cable condition. Check to confirm that the robotic pool cleaner is charged (if it is a battery-powered computer at all), and let it charge if not.
Obstructions in the impeller or wheels can also impede motion. Take the cleaner out of the pool, check for any debris, and rinse it completely. With smarts like those in the Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro, and Beatbot AquaSense 2 being planned, things like leaks will be quickly detected and reported, making pinpointing problems a snap.
Why Does My Pool Vacuum Robot Not Climb Walls?
A wall climbing pool cleaner uses powerful suction and cleaning action to get the job done. If it’s not rising, inspect the filter — it might be clogged or saturated. Clean or replace the filter (if it’s clean and the suction is still low, your cleaner may be set to “floor only”).
Also, look at water chemistry. The cleaner may have a problem with traction if the pool surfaces are too slick because of an imbalance. Balancing your pool’s pH and calcium hardness assists your swimming pool robot cleaner in operating as it should.
Robot For Pool Is Missing Debris or Algae
If your automatic pool cleaner doesn’t collect fine dirt and green patches, the problem is likely related to the filter mechanism. If feasible, then change to a more fine filter cartridge; especially if it is algae. The question many people ask is, “Will a pool robot remove algae?”, then yes — as long as the filter is fine enough, and it’s working properly. For tough cases, use Pool vacuum for algae or pre-treat with algaecide.
For more stubborn build up, acid washing pool surfaces can completely eradicate clarity issues and once and for all stop those gross buildups from coming back. But always treat this technique with caution.
My Suction or Pressure-Side Cleaner is Malfunctioning
Suction Loss For traditional suction or pressure side cleaners, suction loss is a complaint. If vacuum for pool is used, check the hose and test for blockage and debris in the skimmer basket.
All pressure cleaners rely on powerful water flow. If performance is down, the pool booster pump may require inspection or replacement. Read on to figure out what is a pool booster pump and how it plays a role in your cleaner’s performance.
(Optional) A Robot Pool Cleaner That Does Not Clean the Entire Pool
Unclean sensors or cables gone astray are often the cause of shoddy navigation. Make certain that the cord does not kink. Wipe your damp / dry sensors with a soft cloth and look at the drive tracks. Programmable cleaners, such as the Maytronics pool cleaner or the Beatbot, have the ability to set their cleaning paths for better coverage.
Restarting the system and firmware updates (if one is available) are another way to fix coverage issues on smart models.
When to Drain or Acculity Pool.
If your robot pool cleaner does not restore your pools crystal clearness and cleanliness, then you probably need a deep maintenance. It is for this reason that understanding how to drain an inground pool without a pump (through gravity, siphon or the integrated drains in your pool) is essential.
This process will refresh the water and start the pool out fresh again for your cleaner so that it can do its best work.
Conclusion: Keep Your Robotic Pool Cleaner Well-Maintained
With regular maintenance and even the occasional deep clean, your robot pool cleaner can work like magic. These little repairs, including anything from cleaning the filters to fixing a climbing wall that isn’t climbing, or improving suction, can stave off big repairs and get you a lot more life out of your system.
They are the best in their category for superior cleaning and advanced troubleshooting capabilities in the top models: Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro, and Beatbot AquaSense 2. Whether you have a pool vacuum robot, skimmer, or are looking to acid wash pool surfaces, maintaining your pool now will help keep your water safe and clear, so your pool never gets in the way of any summer fun.